AB52 Series Timers
AB54 Series Timers
The AB52 series of timers are basic interval timers requiring the interval to be reset manually at the beginning of each cycle. The timer features an external friction which provides low setting-torque and enables the setting to be changed during the cycle without damage. The load switch is an isolated single pole, double throw on the standard unit, however, the AB52 is available with a double pole, double throw on special order. Standard shaft rotation is clockwise when timing. Timing can also be started by rotating the shaft in either direction. Knobs and dials are available as separate items.
Model Number |
Cycle Time |
Status |
AB52-001 | 1 Min. | Available * |
AB52-002 | 10 Min. | Available * |
AB52-003 | 20 Min. | Available * |
AB52-004 | 40 Min. | Available * |
AB52-005 | 60 Min. | Available * |
AB52-006 | 2 Hr. | Available * |
AB52-007 | 6 Hr. | Available * |
AB52-008 | 8 Hr. | Available * |
AB52-009 | 12 Hr. | Available * |
AB52-010 | 24 Hr. | Available * |
* Check with factory for stock and delivery |
MPB Series Timers
LPB Series Timers
The MPB & LPB Series are automatic reset, push-button operated interval timers. The MPB features an attractive bezel framed dial with time selector ring and start button combined into a single assembly. The LPB is a panel mount type. Time interval indication is viewed by a moving white pointer located within the selector ring.
Model Number |
Minimum Setting |
Maximum Setting |
Status |
|
MPB-60S | LPB-60S | 1 Sec. | 60 Sec. | Available * |
MPB-3M | LPB-3M | 3 Sec. | 3 Min. | Available * |
MPB-5M | LPB-5M | 5 Sec. | 5 Min. | Available * |
MPB-10M | LPB-10M | 10 Sec. | 10 Min. | Available * |
MPB-15M | LPB-15M | 15 Sec. | 15 Min. | Available * |
MPB-30M | LPB-30M | 30 Sec. | 30 Min. | Available * |
MPB-60M | LPB-60M | 60 Sec. | 60 Min. | Available * |
MPB-12H | LPB-12H | 12 Min. | 12 Hr. | Available * |
* Check with factory for stock and delivery |
P Series Timers
P series timers are highly portable, high precision interval timers fitted with standard 3-wire power cord and load receptacles. They feature automatic reset, infinite resolution clutch, and either local or remote momentary start. The unit is housed in a sturdy metal case designed for surface mounting. A toggle switch is provided to enable the load to be powered continuously. Both this switch and the load switch are factory wired to input power providing 120 volts AC to the load receptacle.
Model Number |
Cycle Time |
Dial Division |
Status |
P-6S | 6 Sec. | 0.1 Sec. | Discontinued |
P-15S | 15 Sec. | 0.25 Sec. | Available * |
P-30S | 30 Sec. | 0.5 Sec. | Available * |
P-1M | 60 Sec. | 1 Sec. | Available * |
P-3M | 3 Min. | 3 Sec. | Available * |
P-5M | 5 Min. | 5 Sec. | Available * |
P-15M | 15 Min. | 15 Sec. | Available * |
P-30M | 30 Min. | 30 Sec. | Available * |
P-60M | 60 Min. | 60 Sec. | Discontinued |
P-3H | 3 Hr. | 3 Min. | Discontinued |
* Check with factory for stock and delivery |
PAB Series Timers
PAF Series Timers
The PAB and PAF series timers are rugged, high precision, hard wired interval timers, featuring automatic reset and an infinite resolution clutch. Both units feature an internal holding circuit allowing the use of a momentary start button and, if desired, an emergency stop switch. Both have an isolated single pole, double throw load switch. The PAB is designed for surface mounting while the PAF is panel mounted.
Model Number |
Cycle Time |
Dial Division |
Status |
|
PAB-1S | PAF-1S | 1 Sec. | 1/60 Sec. | Discontinued |
PAB-3S | PAF-3S | 3 Sec. | 1/20 Sec. | Discontinued |
PAB-6S | PAF-6S | 6 Sec. | 1/10 Sec. | Discontinued |
PAB-15S | PAF-15S | 15 Sec. | 1/4 Sec. | Available * |
PAB-30S | PAF-30S | 30 Sec. | 1/2 Sec. | Available * |
PAB-60S | PAF-60S | 60 Sec. | 1 Sec. | Available * |
PAB-3M | PAF-3M | 3 Min. | 3 Sec. | Available * |
PAB-5M | PAF-5M | 5 Min. | 5 Sec. | Available * |
PAB-15M | PAF-15M | 15 Min. | 15 Sec. | Available * |
PAB-30M | PAF-30M | 30 Min. | 30 Sec. | Available * |
PAB-60M | PAF-60M | 60 Min. | 60 Sec. | Available * |
PAB-3H | PAF-3H | 3 Hr. | 3 Min. | Available * |
* Check with factory for stock and delivery |
SARF Series Timers
Standard 3-wire line (power) cord and load receptacles give the SAR high precision interval timer complete portability. Additionally, it is housed in a sturdy metal case designed for surface mounting. The more conventional SARF is designed for panel mounting with electrical connections to a screw type terminal block (making it non-portable). Both units feature a pilot light and added convenience of an audible signal at the end of the timing cycle. Start/Stop control is through a toggle switch on the face of either unit. Load output is 120VAC and both normally closed contacts are available at the output receptacles (SAR) or at the terminal block (SARF).
Model Number |
Maximum Time Cycle |
Dial Division |
Status |
|
SAR-1M | SARF-1M | 1 Min. | 1 Sec. | Available * |
SAR-5M | SARF-5M | 5 Min. | 5 Sec. | Available * |
SAR-15M | SARF-15M | 15 Min. | 15 Sec. | Available * |
SAR-30M | SARF-30M | 30 Min. | 30 Sec. | Available * |
SAR-1H | SARF-1H | 1 Hr. | 1 Min. | Available * |
SAR-3H | SARF-3H | 3 Hr. | 3 Min. | Available * |
* Check with factory for stock and delivery |