Dark Room Timers

Time-O-Lite

GR-90 Series Timers
 GR-90 Enlarging Timer
Push Button Start, Automatic Reset.
The GR-90 Enlarging Timer incorporates an accurate synchronous motor drive coupled with a simplified automatic reset timing mechanism. A toggle switch controls power to the load receptacle, permitting either timed or constant output. Features include luminous dial, chemical-resistant plastic case, wall or table mounting and polarized three-wire line cord and receptacle. 750 watt load capacity. UL listed and CSA approved.
Printable Specifications Download PDF file reader

Model
Volts
Frequency		 Maximum
Time		 Dial
Calibration
Status
GR-90 120 VAC 60 Hertz 60 Seconds 1 Second Available *
* Check with factory for stock and delivery



M-72 Series Timers
 M-72 Master Timer
Push Button Start, Automatic Reset.
With interval and remaining time indicators. Easy-to-read Luminous dial. Enlarger goes on and safelight goes out when push button is operated. Linecord, Enlarger and safelight outlets are polarized with a two wire and ground connection. Heavy duty synchronous motor. 750 watt load capacity. UL listed and CSA approved.
Printable Specifications Download PDF file reader

Model
Volts
Frequency		 Maximum
Time		 Dial
Calibration
Status
M-72-60S 120 VAC 50Hz or 60Hz 60 Seconds 1 Second Available *
M-72R All the features of the M-72 Master Timer in GR-90 styling
* Check with factory for stock and delivery



P-72 Series Timers

FS65 Footswitch
Accessory
 P-72 Professional Timer
Push Button Start, Automatic Reset.
For exact, fully automatic timing of all darkroom work. Interval and remaining time indicators. Enlarger goes on and safelight goes out when push button is operated. Luminous dial. Linecord, enlarger and safelight outlets are polarized with a two wire and ground connection. Small receptacle accepts Model FS-65 footswitch (not included) for remote operation. Heavy duty synchronous motor. 1000 watt load capacity. UL listed, CSA approved.
Printable Specifications Download PDF file reader

Model
Volts
Frequency		 Maximum
Time		 Dial
Calibration
Status
P-72-60S 120 VAC 50Hz or 60Hz 60 Seconds 1 Second Available *
P-72-4R 120 VAC 50Hz or 60Hz 15 Seconds ¼ Second Available *
P-72-3M 120 VAC 50Hz or 60Hz 3 Minutes 3 Seconds Available *
P-72-5M 120 VAC 50Hz or 60Hz 5 Minutes 5 Seconds Available *
* Check with factory for stock and delivery


Home - General Purpose Timers - Delay Timers - Interval Timers - Programmable Timers - Elapsed Time Indicators - Dark Room Timers - Gear Rack Chart - Glossary - About ITC - Contact ITC