Delay Timers

90 Series Timers
 90 Series Timers
Automatic Reset Panel Mount.
The 90 series timer is a basic time delay timer designed for remote surface mounting where infrequent adjustment of the time delay is anticipated. It features automatic reset upon removal of power and an isolated single pole, double throw switch.
Technical Specifications Download PDF file reader
Model
Number		 Maximum
Setting		 Minimum
Setting
Status
90-6S 6 Sec. ½ Sec. Discontinued
90-15S 15 Sec. 1½ Sec. Available *
90-30S 30 Sec. 3 Sec. Available *
90-60S 60 Sec. 6 Sec. Available *
90-90S 90 Sec. 9 Sec. Available *
* Check with factory for stock and delivery



CSF & SF
Series Timers
 CSF & SF Timers
Automatic Reset Surface Mount.
These standard time delay timers are designed for remote surface mounting where infrequent adjustment of the time delay setting is anticipated. The SF timers are in the 15 and 30 second ranges and use a clutch motor. The CSF timers operate in the range of one minute and above and use an external clutch to provide fast reset. Both units feature automatic reset upon removal of power, and an isolated single pole, double throw load switch. The CSF also features a motor control switch to protect the motor at the end of the time cycle. Units are available with two SPDT load switches on special order. The CSF series may be specified with a reverse clutch.
Technical Specifications Download PDF file reader
Model
Number		 Maximum
Time cycle		 Dial
Division
Status
SF-6S 6 Sec. .1 Sec. Discontinued
SF-15S 15 Sec. .25 Sec. Available *
SF-30S 30 Sec. .5 Sec. Available *
CSF-1M 60 Sec. 1 Sec. Available *
CSF-3M 3 Min. 3 Sec. Available *
CSF-5M 5 Min. 5 Sec. Available *
CSF-15M 15 Min. 15 Sec. Available *
CSF-30M 30 Min. 30 Sec. Available *
CSF-60M 60 Min. 60 Sec. Available *
CSF-3H 3 Hr. 3 Min. Available *
* Check with factory for stock and delivery



DA21 Series Timers
 DA11 & DA21 Series Timers
Automatic Reset Surface Mount.
The DA series timers are basic time delay units designed for surface mounting. The DA11 features a knob for setting the time delay, while the DA21 has a locking nut. A clutch motor is used as the timing element in all units, and automatic reset upon removal of power is standard. The load switch is an isolated single pole, double throw switch.
Technical Specifications Download PDF file reader
Model
Number		 Maximum
Time Cycle		 Dial
Division
Status
DA11-031 14 Sec. 1 Sec. Available *
DA11-032 57 Sec. 1½ Sec. Available *
DA11-033 4.5 Sec. 15 Sec. Available *
DA11-034 9.5 Sec. 120 Sec. Available *
DA11-035 114 Sec. 9 Sec. Available *
DA11-036 5.7 Sec. .25 Sec. Available *
DA21-001 14 Sec. 1 Sec. Available *
DA21-002 57 Sec. 1.5 Sec. Available *
DA21-003 4.5 Min. 15 Sec. Available *
DA21-004 9.5 Sec. 120 Sec. Available *
DA21-005 114 Sec. 9 Sec. Available *
* Check with factory for stock and delivery



DP11 Series Timers
 DP11 Series Timers
Automatic Reset Panel Mount.
The DP series are basic time delay timers designed for panel mounting. Each unit has an attractive black square dial with a selector knob for setting the time delay and an indicator inside the knob that shows progress. DP timers feature automatic reset upon removal of power and an isolated single pole, double throw load switch. A clutch motor is used as the timing element.
Technical Specifications Download PDF file reader
Model
Number		 Time
Cycle		 Maximum
Reset Time
Status
DP11-001 15 Sec. 1 Sec. Discontinued
DP11-002 60 Sec. 1½ Sec. Limited Quantities *
DP11-003 5 Min. 15 Sec. Discontinued
DP11-004 10 Min. 120 Sec. Discontinued
DP11-005 120 Sec. 10 Sec. Discontinued
DP11-006 30 Sec. 1½ Sec. Discontinued
DP11-007 6 Sec. ½ Sec. Discontinued
* Check with factory for stock and delivery



H & CH Series Timers
 H & CH Timers
Automatic Reset Panel Mount.
The H and CH series are standard time delay timers designed for panel mounting. The H timers cover the 15 and 30 second time ranges and have a clutch motor. The CH timers are available in 1, 3, 5, and 30 minute time ranges and feature an exernal clutch to enable fast reset. It also features a motor control switch to protect the motor at the end of the time cycle. The CH is available in longer time ranges on special order. Both units provide automatic reset upon removal of power and have an isolated single pole, double throw load switch.
Technical Specifications Download PDF file reader
Model
Number		 Maximum
Time cycle		 Dial
Division
Status
H-6S 6 Sec. .1 Sec. Discontinued
H-15S 15 Sec. .25 Sec. Available *
H-30S 30 Sec. .5 Sec. Available *
CH-1M 60 Sec. 1 Sec. Available *
CH-3M 3 Min. 3 Sec. Available *
CH-5M 5 Min. 5 Sec. Available *
* Check with factory for stock and delivery



TD Series Timers
 TD Series Timers
Automatic Reset Surface Mount.
The TD series timers are standard delay units in a round housing featuring a round dial for both set time progress indication. They are designed for panel mounting and contain their own brackets for easy installation in the panel. The timers utilize a clutch-type motor as the timing element. All units feature automatic reset upon removal of power and n isolated single pole, double throw load switch. The housing is dust-and-moister resistant and features screw type terminals for electrical connections.
Technical Specifications Download PDF file reader
Model
Number		 Maximum
Time cycle		 Dial
Division
Status
TD-6S 6 Sec. .1 Sec. Discontinued
TD-15S 15 Sec. .25 Sec. Available *
TD-30S 30 Sec. .5 Sec. Available *
* Check with factory for stock and delivery



TDAB
Series Timers
 

TDAF
Series Timers
TDAB & TDAF Timers
Automatic Reset and Infinite-Resolution Clutch.
The TDAB abd TDAF series timers are rugged, high precision time delay timers. They feature automatic reset and an infinite-resolution clutch. The TDAF is designed for panel mounting. The TDAB is designed for back or surface mounting; an enclosure is available. On both units, wiring connections are made on the screw type terminal block. Both have an isolated single pole, double throw load switch. As an option, a reverse clutch is available.
Technical Specifications Download PDF file reader
Model
Number		 Maximum
Time cycle		 Dial
Division
Status
TDAB 6S TDAF 6S 6 Sec. .1 Sec. Discontinued
TDAB 15S TDAF 15S 15 Sec. .25 Sec. Available *
TDAB 30S TDAF 30S 30 Sec. .5 Sec. Available *
TDAB 60S TDAF 60S 60 Sec. 1 Sec. Available *
TDAB 3M TDAF 3M 3 Min. 3 Sec. Available *
TDAB 5M TDAF 5M 5 Min. 5 Sec. Available *
TDAB 15M TDAF 15M 15 Min. 15 Sec. Available *
TDAB 30M TDAF 30M 30 Min. 30 Sec. Available *
TDAB 60M TDAF 60M 60 Min. 60 Sec. Available *
TDAB 3H TDAF 3H 3 Hr. 3 Min. Available *
* Check with factory for stock and delivery


Home - General Purpose Timers - Delay Timers - Interval Timers - Programmable Timers - Elapsed Time Indicators - Dark Room Timers - Gear Rack Chart - Glossary - About ITC - Contact ITC