Industrial Timer Company 30 Industrial Park Road Centerbrook, CT 06409 Toll Free: (800) 394-7130 Fax: (860) 767-9137

	Home - General Purpose Timers - Delay Timers - Interval Timers - Programmable Timers - Elapsed Time Indicators - Dark Room Timers - Gear Rack Chart - Glossary - About ITC - Contact ITC
	Elapsed Time Indicators

C2 Series Meter C5 Series Meter

C-2, C-5 & C-25 Series Timers Standard Precision, Manual Reset Function, Panel Mount. The C2 and C25 elapse time indicators feature a five-digit readout with no reset capabilities, making them virtually tamper proof. Both are completely enclosed in a moisture-and-dust-resistant housing designed for panel mounting. The C2 has a round bezel and the C25 has a square bezel. The C5 offers a reset feature. Reset is accomplished through a reset wheel that protrudes through the dial. This unit also is enclosed in a moisture-and-dust-resistant housing. It has a square bezel similar to the C25. Technical Specifications Model Number Reading Maximum Registration C-2 C-25 Hr. & Tenths 10,000 Hr. C-2A C-25A Hr. 100,000 Hr. C-2D C-25D Min. & Tenths 10,000 Min. C-2F C-25F Min. 100,000 Min. C-2G C-25G Sec. & Tenths 10,000 Sec. C-2H C-25H Sec. 100,000 Sec. C-5 Hr. & Tenths 10,000 Hr. C-5A Hr. 100,000 Hr. C-5D Min. & Tenths 10,000 Min. C-5F Min. 100,000 Min.

C6W Series Meter

C-6W Series Timers Basic DC Power, Solenoid Wound, Panel Mount. These rugged DC-powered elapsed time indicators feature a five digit readout with a maximum of 9999.9 hours and are completely sealed in a glass-and-metal housing. They are powered by a rugged, pulse-wound clock mechanism that requires a power pulse approximately every 30 seconds when the unit is energized. Units will operate at any voltage from 8 to 50 VDC. Mounting is by four mounting screws on the square bezel C6 unit or by a back braket on the round bezel C6W. Wiring to both units is through 1/4 inch quick disconnect terminals. Technical Specifications

ED Series Meter

ED Series Timers High Precision, Dust & Moisture Resistant, Panel Mount. This series of running time meters feature a five-digit readout and are completely enclosed in a glass-and-metal housing. There is no reset feature, making the unit virtually tamper proof. The ED series is the commercial version which, although not hermetically sealed, provides dust and moisture resistance. It is available with either glass-fused solder terminals, or 11¼ inch leads. Technical Specifications Model Number Lead Configuration Status ED7112 ED7212 11¼ In. solder Terminals Available

7010 Series Timers Model Number voltage Frequency Status 7010-004-007 115V/400Hz Discontinued 7010-010-003 120V/60Hz Discontinued

EF13 Series EF27 Series EG Series

EF and EG Timers Tamper proof basic running time meter. These series of running time meters feature a six-digit readout with no reset capabilities, making them virtually tamper proof. The EG series, a basic timer without housing or bezel, is designed for mounting behind a panel while the EF series is provided with its own bezel. The EF13 has a round bezel while the EF27 has a square bezel. The EG series and the EF13 units are provided with an indicator to show the unit is operating. The synchronous motor provides accuracy equal to that of the power line frequency. Technical Specifications Model Number Indicates Status EF1333 min. & tenths Available EF1335 hr. & tenths Available EF2733 min. & tenths Available EF2735 hr. & tenths Available EG1333 min. & tenths Available EG1335 hr. & tenths Available

Home - General Purpose Timers - Delay Timers - Interval Timers - Programmable Timers - Elapsed Time Indicators - Dark Room Timers - Gear Rack Chart - Glossary - About ITC - Contact ITC